Alice M. Agogino – Recent Publications

PUBLICATIONS – JULY 1, 2013-JUNE 30, 2017

CATEGORY A: REFEREED PUBLICATIONS

Peer-Reviewed Journal Publications (11)

  1. “What Alumni Value from New Product Development Education: A Longitudinal Study,” (with Cobb, C.L. J. Hey, S.L. Beckman and S.-Y. Kim), Advances in Engineering Education, special issue on Innovation and Entrepreneurship, ASEE, 5(1), pp. 1-37, 2016. Download (pdf).
  2. “Analysis of Collaborative Design Networks: A Case Study of Open IDEO”. (with M. Fuge, K. Tee, and N. Maton), ASME Journal of Computing and Information Science in Engineering (JCISE), 14 (2), 2014. doi:10.1115/1.4026510. Download (pdf).
  3. “Sensor-Based Predictive Modeling for Smart Lighting in Grid-Integrated Buildings”, (with C. Basu, J. Caubel, K. Kim, E. Cheng, A. Dhinakaran, R. Martin), IEEE Sensors, special issue on Sensing Technologies for Intelligent Urban Infrastructures, IEEE, December 2014, pp. 4216-4229. 10.1109/JSEN.2014.2352331. Download (pdf).
  4. “Machine Learning Algorithms for Recommending Design Methods”, (with M. Fuge, B. Peters), ASME Transactions, Journal of Mechanical Design, 136 (10), pp. 071405-071405-10, Oct. 2014, MD-14-1013; doi: 10.1115/1.4028102. Updated version of conference paper [24]. Download (pdf).
  5. “Pattern Analysis of IDEO’s Human-Centered Design Methods in Developing Regions” (with M. Fuge), ASME Journal of Mechanical Design, 137 (7), pp. 071405-071405-10, MD-14-1571, 2015, doi: 10.1115/1.4030047. Download (pdf).
  6. “Design Thinking in Development”, (with D. I. Levine, M.A. Lesniewski), International Journal of Engineering Education, 32 (3B), pp. 1396-1406, 2016. Download pre-publication version (pdf).
  7. “Design Practitioners’ Perspectives on Methods for Ideation and Prototyping”, (with S. Beckman, C. Castaños, J. Kramer, C.Roschuni, M. Yang), International Journal of Engineering Education, 32 (3B), pp. 1428-1437, 2016. Updated version of conference paper [33]. Pre-publication version (pdf).
  8. “Design Roadmapping: A Framework and Case Study of Planning Development of High-Tech Products in Silicon Valley”, (with E. Kim, J. Chung, S. Beckman), ASME Transactions, Journal of Mechanical Design,138 (10) 2016. doi: 10.1115/1.4034221. Updated version of conference paper [39]. Download pdf.
  9. “Soft Spherical Tensegrity Robot Design Using Rod-Centered Actuation and Control,” (with L.-H. Chen, K. Kim, E. Tang, K. Li, R. House, A.K. Agogino, V. Sunspiral, E. Jung), Journal of Mechanisms and Robotics,9 (2), pp. 0205001-1-9, 2017. Paper No: MD-16-1041, doi: 10.1115/1.4036014. Updated version of conference paper [41]. Download pdf.
  10. “Concept Clustering in Design Teams: A Comparison of Human and Machine Clustering,” (with C. Zhang, Y. P. Kwon, J. Kramer, E. Kim), ASMEJournal of Mechanical Design, special issue on data-driven design, MD-17-1159, 2017, in press. Updated version of conference paper [54]. Download  pdf.
  11. “Design Roadmapping in a VUCA (Volatility, Uncertainty, Complexity, Ambiguity) World: Implementing a Customer Experience-Focused Strategy,” (with E. Kim, S. Beckman), California Management Review, Special Issue on “Management Innovation in an Uncertain World”, 2017, in press. Download pre-publication pdf.

Peer-Reviewed Books or Book Chapters (4)

  1. Career Choices of Female Engineers, (CSWEM Committee Report of Workshop), National Academies Press, 2014.
  2. “Social Factors in the Age of Social Media: Transdisciplinary Co-Design with the Pinoleville Pomo Nation” (with Perez, Y., R. Shelby, D. Edmunds, A. James). Chapter 8 in Death and Life of Social Factors (ed., Lusi Morhayim and Georgia Lindsay), Cambridge Scholars Publishing, 166-189, 2015. ISBN (10): 1-4438-7734-4.   Chapter 8 Perez et al (pdf)
  3. “A Comparison of Two Transdisciplinary Human-Centered Design Approaches for Poverty Alleviation”, (with J. Vechakul). Chapter in The Future of Transdisciplinary Design (eds. L. Blessing, A.J. Qureshi and K. Gericke), Springer Publishing, 2017, in press. ISBN 978-3-319-06381-2. Updated version of conference paper included in previous review.  Pre-publication –  TFTD13_IDEOorg_IDDS_12.
  4. “Information and Communication Technologies as a Bridge between Global Designers and Local Users”, (with Y. Perez). Chapter in The Future of Transdisciplinary Design, (Eds. L. Blessing, A.J. Qureshi and K. Gericke), Springer Publishing, 2017, in press. ISBN 978-3-319-06381-2. Updated version of conference paper included in previous review.  Pre-publication – TFTD13_ID38_final130715v4.

Peer-reviewed Conference Proceedings (41)

  1. “Human-Centric Study of Digital-Paper Transitions: Framing Design Opportunity Spaces”, (with E.Y. Kim, V.S. Kocsik, C.E. Basnage), Proceedings of the International Conference on Engineering Design (ICED 2013), August 2013. Won “Reviewers’ Favourite” paper award. Download (pdf).
  2. “Automatically Inferring Metrics for Design Creativity,” (with M. Fuge and J. Stroud), Proceedings of ASME DETC, DTM 2013, August 2013. Download (pdf).
  3. “Cross-Community Design and Implementation of Engineering Tinkering Activities at a Science Center”,  (with J. Wang), FabLearn, (Stanford University, Oct. 27-28, 2013). Pre-publication pdf.
  4. Affordable and Personalized Lighting Using Inverse Modeling and Virtual Sensors”, (with C. Basu, B. Chu, J. Richards, A. Dhinakaran, and R. Martin), Proceedings of the SPIE Smart Structures Technologies for Civil, Mechanical and Aerospace System, Vol. 9061, 8 March 2014. doi:10.1117/12.2048681. Download (pdf).
  5. “SUPERball: Exploring Tensegrities for Planetary Probes”, (with A.P. Sabelhaus, A.P., K. Caluwaerts, J. Bruce and V. SunSpiral), Proceedings of the 12th International Symposium on Artificial Intelligence, Robotics, and Automation in Space (i-SAIRAS), June 2014. Download (pdf).
  6. “Hardware  Design and Testing of SUPERball, a Modular Tensegrity Robot” , (with A.P. Sabelhaus, A.P., K. Caluwaerts, J. Bruce and V. SunSpiral), Proceedings of the WCSCM6 (6th World Conference on Structural Control and Monitoring), July 2014. Download (pdf).
  7. “Identifying Design Opportunity Spaces in New User Interfaces for Exoskeleton Mobility Devices”, (with E.Y. Kim, J. Jeong, K. Mock, and V. Kocsik), Proceedings of the International Design Conference – Design 2014, Bubrovnik, Croatia, May 2014. Download (pdf).
  8. “How Online Design Communities Evolve Over Time: The Birth and Growth of OpenIDEO”, (with M. Fuge and N. Maton), Proceedings of ASME Design Engineering Technical Conference (DETC), Design, Theory and Methods, August 2014. Download (pdf).
  9. “User Research Methods for Development Engineering: A Study of Method Usage with IDEO’s HCD Connect”, (with M. Fuge and S. Hewens), Proceedings of ASME Design Engineering Technical Conference (DETC), Design, Theory and Methods, August 2014. Updated version published in the ASME Transactions, Journal of Mechanical Design [4]. Download (pdf).
  10. “Learning about Learning and Engineering: Engineers, Students and Educators Co-Design Challenges for a Science Museum“, (with J. Wang), Proceedings of ASEE Annual Conference, Paper ID #10509 June 2014. Download (pdf).
  11. “Design for Development Online: An HCD Analysis of OpenIDEO”, (with P. Gordon and M. Fuge), Proceedings of the ASME International Mechanical Engineering Congress, 2014. Download (pdf).
  12. “Rapid Prototyping Design and Control of Tensegrity Soft Robot for Locomotion”, (with K. Kyunam, A.K. Agogino, D. Moon, L. Taneja, Al. Toghyan, B. Dehghani and V. SunSprial), Proceedings of the 2014 International Conference on Robotics and Biomimetics (ROBIO 2014), 2014. Finalist for Best Student Paper Award. Download (pdf).
  13. “Co-Creation of Culinary Experience Design in the Chez Panisse Open Innovation Ecosystem,”  (with S. Kim and H. Chesbrough), 1st Annual World Open Innovation Conference, Dec. 4-5, 2014. Pre-publication pdf.
  14. “System Design and Locomotion of SUPERball, an Autonomous Tensegrity Robot,” (with A.P. Sabelhaus, J. Bruce, K. Caluwaerts, P. Manovi, R. G. Firoozi, S. Dobi, and V. SunSpiral),Proceedings of 2015 IEEE International Conference on Robotics and Automation (ICRA-2015), May 26-30, 2015, Washington State Convention Center, Seattle, Washington. Download (pdf).
  15. “Emergent Form-Finding for Center of Mass Control of Ball-Shaped Tensegrity Robots,” (with K. Kim and A.K. Agogino),ARMS (Autonomous Robots and Multirobot Systems) workshop, (affiliated with the 14th International Conference on Autonomous Agents and Multiagent Systems – AAMAS 2015). Istanbul, Turkey, May 4-5, 2015. Pre-publication pdf.
  16. “Design Roadmapping: Challenges and Opportunities,” (with E.-Y. Kim and S. Yao), Proceedings of the International Conference in Engineering Design– Part 2, pp. 85-94, 2015. (Won Reviewer’s Favourite Award). Download (pdf). 
  17. “Design Talking: A Taxonomy of Design Methods in theDesignExchange,” (with C. Roshuni, J. Kramer, Q. Zhang and L. Zakskorn ),Proceedings of 2015 International Conference on Engineering Design (ICED15), July 27-30, 2015. (Won Reviewer’s Favourite Award). Pre-publication (pdf).
  18. “Design Practitioners’ Perspectives on Methods for Ideation and Prototyping,” (with S. Beckman, J. Kramer, C. Roschuni and M. Yang),Proceedings of the 2015 Mudd Design Workshop, Center for Design Education of Harvey Mudd College, May 2015. Updated version published in the International Journal of Engineering Education [7]. Pre-publication (pdf).
  19. “Design Thinking in Development Engineering,” (with D. Levine and M. Lesniewski),Proceedings of the 2015 Mudd Design Workshop, Center for Design Education of Harvey Mudd College, May 2015.  Updated version published in the International Journal of Engineering Education [6]. Pre-publication (pdf).
  20. “Detection of Chiller Energy Efficiency Faults Using Expected Maximization,” (with R.L. Hu and J. Granderson),Proceedings of the International Design Engineering Conference IDETC/CIE 2015, Computers and Information in Engineering Conference (CIE), ASME. Pre-publication (pdf).
  21. “Mechanism Design and Simulation of an Underactuated Spine-Like Tensegrity Robot,” (with A.P. Sabelhaus, P. Hylton, Y. Madaan, C.W. Yang, J. Friesen and V. SunSpiral), Proceedings of the International Design Engineering Conference IDETC/CIE 2015, Mechanisms and Robotics Conference, ASME. Pre-publication (pdf).
  22. “Design Talking: How Design Practitioners Talk About Design Research Methods,” (with C. Roschuni and J. Kramer),Proceedings of the International Design Engineering Conference IDETC/CIE 2015, International Conference on Design Education, ASME. Pre-publication (pdf).
  23. “Robust Learning of Tensegrity Robot Control for Locomotion through Form-Finding,” (with K. Kim, A.K. Agogino, A. Toghyan, D. Moon, L. Taneja), Proceedings of theInternational Conference on Intelligent Robots and Systems (IROS 2015), IEEE, DOI: 1109/IROS.2015.7354204, pp. 5824 – 5831. Pre-publication (pdf).
  24. “Design Roadmapping: A Framework and Case Study of Planning Development of High-Tech Products in Silicon Valley”, (with E. Kim, S. Beckman), Proceedings of the ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference Design Theory and Methods,American Society of Mechanical Engineers, August 21-24, Charlotte, NC, USA (2016). Won Design Theory and Methods Best Paper Award. Updated version published in the ASME Transactions, Journal of Mechanical Design [8].  Download (pdf).
  25. “Characterizing Skills for Human-Centered Design,” (with J. Kramer and C. Roschuni), Proceedings of the ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference Design Education,American Society of Mechanical Engineers, August 21-24, Charlotte, NC, USA (2016). Pre-publication (pdf).
  26. “Soft Spherical Tensegrity Robot Design using Rod-centered Actuation and Control,” (with L.-H. Chen, K. Kim, E. Tang, K. Li, R. House, A.K. Agogino, V. Sunspiral, E. Jung), Proceedings of the ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 40th Mechanisms and Robotics Conference,American Society of Mechanical Engineers, August 21-24, Charlotte, NC, USA (2016). Updated version published in the ASME Transactions, Journal of Mechanisms and Robotics [4]. Pre-publication (pdf).
  27. “DNA-Structured Linear Actuators,” (with K. Zampaglione, A.P. Sabelhaus, L.-H. Chen, A.K. Agogino),Proceedings of the ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 40th Mechanisms and Robotics Conference, American Society of Mechanical Engineers, August 21-24, Charlotte, NC, USA (2016). Pre-publication (pdf).
  28. “Diagnosing Wind Turbine Faults Using Machine Learning Techniques Applied to Operational Data”, (with K. Leahy, R. Lily Hu, I. C. Konstantakopoulos, C. Spanos), Proceedings of the 2016 IEEE International Conference on Prognostics and Health Management, Ottawa, Canada, Carleton University, June 20-22, 2016. Download (pdf).
  29. “Hopping and Rolling Locomotion with Spherical Tensegrity Robots,” (with K. Kyunam, L.H. Chen, B. Cera, M. Daly, E. Zhu, J. Despois, A.K. Agogino, V. SunSpiral), Proceedings of 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS2016), Daejeon, Korea, Oct 9-14, 2016. Pre-publication (pdf).
  30. “Spin-Axis Stabilization of a Rigid Body about an Arbitrary Direction using Two Reaction Wheels,” (with K. Kim), Proceedings of 2016 IEEE Conference on Decision and Control (CDC2016), Las Vegas, NV, USA, Dec 12-14, 2016. Download pre-publication version (pdf).
  31. “Design and Systems Thinking in Development Engineering: A Case Study of Liver Infection in Khon Kaen, Thailand, (with S. Samiphak, S.L. Syme, R. H. Lamoreaux), Proceedings of ICEER. Pre-publication (pdf).
  32. “Using Domain Knowledge Features for Wind Turbine Diagnostics,” (with R. Lily Hu, Kevin Leahy, Ioannis Konstantakopoulos, David Auslander, Costas Spanos), Proceedings to the 15thIEEE International Conference on Machine Learning and Applications, IEEE ICMLA 2016 (Anaheim, CA, Dec. 18-20, 2016). Download (pdf).
  33. “What Green Design Activities and Mindsets Drive Innovation and Sustainability in Student Teams?”, (with J. Faludi, S. Beckman, A. Iles) Proceedings of the ICED17, International Conference in Engineering Design, Vol. 9: Design Education, Vancouver, Canada, 21.-25.08.2017, pp. 89-97. Download (pdf).
  34. “Using theDesignExchange as a Knowledge Platform for Human-Centered Design-Driven Global Development,” (with Kramer, J., D. Poreh), Proceedings of the ICED17, International Conference in Engineering Design, Vol. 1: Resource-Sensitive Design | Design Research Applications and Case Studies, Vancouver, Canada, 21.-25.08.2017, pp. 101-110. Download (pdf).
  35. “Building 21st Century Skills through Development Engineering”, (with Gordon, P., J. Kramer, R. Dzombak, S. Martin), Proceedings of the Mudd Design Workshop, 2017 titled “Design and the Future of the Engineer of 2020”. Pre-publication (pdf).
  36. “Teaching and Evaluating Design Competencies in the 21st Century”(with J. Kramer, Euiyoung Kim, Danielle Poreh), extended abstract in the Proceedings of the Mudd Design Workshop, 2017 titled “Design and the Future of the Engineer of 2020”. Download Abstract (pdf). Download Poster (pdf).
  37. “Scenario-based Conjoint Analysis: Defining User Experience Expectations on Unexplored Future Product Concepts (with E. Kim, H. Kim, J. Chen), Proceedings of the ASME International Design Engineering Technical Conference (IDETC) August 2017. Download DETC2017-67690 (pdf).
  38. “Modular Elastic Lattice Platform for Rapid Prototyping of Tensegrity Robots” (with L.-H. Chen, M.C. Daly, A.P. Sabelhaus, L.A. Janse van Vuuren, H.J. Garnier, M. I. Verdugo, E. Tang, C. U. Spanenberg, F. Ghahani, A.K. Agogino), Proceedings of the ASME International Design Engineering Technical Conference (IDETC), IDETC2017-68264, August 2017. Download DETC2017-68264 (pdf).
  39. “Deep Learning for Design in Concept Clustering” (with C. Zhang, Y.P. Kwon, J. Kramer, E. Kim, Proceedings of the ASME International Design Engineering Technical Conference (IDETC), August 2017. Updated version to be published in the ASME Transactions, Journal of Mechanical Design [10]. Download DETC2017-68352 (pdf).
  40. “Inclined Surface Locomotion Strategies for Spherical Tensegrity Robots“, (with L.-H. Chen, B. Cera, E.L. Zhu, R. Edmunds, F. Rice, A. Bronars, E. Tang., S.R. Malekshahi, O. Romero, A.K. Agogino), Proceedings of  the International Conference on Intelligent Robotics  and Systems (IROS 2017), September 24-28, 2017. Download (pdf).  Slides (pdf).
  41. “Design of a Spherical Tensegrity Robot for Dynamic Locomotion”, (Kyunam Kim, Deaho Moon, Jae Young Bin, A.M. Agogino), Proceedings of the International Conference on Intelligent Robotics and Systems (IROS 2017), September 24-28, 2017.  Download (pdf).

Compressed File of Recent Publications (zip files)